About the PointFive 0.5

The PointFive Series combines the power of an advanced thermal imaging device with the precision of a Pelco pan/tilt to create a completely integrated, single addressable thermal imaging positioning system. At the core of the PointFive is an uncooled, vanadium oxide microbolometer, long wave infrared (LWIR) camera. It delivers 320 x 240 thermal video with a pixel size of 38 μm and supports 2X digital zoom.

The PointFive Series provides outstanding sensitivity below 40 mK. It is capable of multiple display formats, including white hot, black hot, and color signatures.

* The PointFive is available with three different lens configurations (14.25 mm, 35 mm, and 50 mm focal lengths) for effective deployment in a wide range of applications.

The following performance values are based on a man-sized target from a
unit mounted at 25 ft (8 m) under normal atmospheric conditions:

A powder-coated, aluminum construction makes the PointFive Series ideal for either indoor or outdoor applications. The system has an absolute operating temperature range of -50° to 140°F (-45° to 60°C). Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of -13°F (-25°C).

A built-in heater, window defroster/defogger, sun shroud, and insulation blanket are standard features on the PointFive Series. All units also include an open collector auxiliary output that functions for two seconds before deactivating.

The PointFive Series variable pan and tilt speeds range from 0.1 to 40 degrees per second in manual pan mode and 0.1 to 20 degrees per second in manual tilt. Pan preset and turbo speeds are 100 degrees per second in wind speeds of 50 mph and 50 degrees per second in the 90-mph wind-speed profile.

Tilt preset speed is 30 degrees per second. The PointFive is capable of 360 degrees of continuous pan rotation. The tilt range allows for horizontal viewing of +33 to -83 degrees. There are 64 programmable preset positions with a preset accuracy of one-quarter degree.

PointFive Series systems are available with an input voltage of 24 VAC or with a selectable power source of 120/230 VAC. The PointFive also has a power-up recovery mode that lets users specify the operation to perform whenever the power is cycled.

PointFive 0.5 Details

Distance Chart N/A

Product Datasheet N/A

Operation Manual N/A

Pricing and Ordering Information

Features

• User Definable/Programmable Camera Settings
• 2X Digital Zoom
• Receiver, Pan/Tilt, and Enclosure with
   an Integrated Thermal Imaging Camera
• Sensitivity Below 40 mK at F1.0
• Long Wave, Uncooled, Vanadium Oxide
  Microbolometer
• 320 x 240 Resolution—38 µm Pixel Size
• Variable Speed Pan:
   0.1° to 100°/Second with Proportional Pan
• Multiple Lens Options Available
• 360° Continuous Pan Rotation
• Zone Blanking—Allows up to Eight Zones
   (Programmable in Size) to Be Set to Output
    Blank Video
• Operational in 90 mph Wind Conditions;
   Can Withstand Wind Velocity up to 130 mph
• Pan Preset Speed of 100° Per Second in 50 mph
   Winds and 50° Per Second in 90 mph Winds
• Tilt Range of +33° to -83° from Horizontal
• Preset Positioning, Patterns, Multiple Scan Modes
• Designed for Minimal Maintenance, No Gears to Adjust
• On-Screen Compass, Tilt, and Zoom Display
• Integral Multi-Protocol Receiver/Driver